Skip to main content

Version: current

w60g

interface/w60g

Syscap: 60ghz
Type: Directory

Flag	Name	Description
`X`	disabled	disabled
`R`	running	running

Argument	Type	Description
`name`	string
`mtu`	num
`l2mtu`	num
`mac-address`	macAddr
`arp`	enum (disabled \| enabled \| proxy-arp \| reply-only \| local-proxy-arp)
`arp-timeout`	alt { enum (auto) { auto:0 } , time }
`region`	enum (no-region-set \| usa \| canada \| asia \| eu \| japan \| australia \| china)
`mode`	enum (ap-bridge \| station-bridge \| sniff \| bridge \| debug \| terragraph)
`ssid`	string
`frequency`	enum (auto \| 58320 \| 60480 \| 62640 \| 64800 \| 66000 \| 66960 \| 69120)
`scan-list`	multi_arg { array-id, enum (58320 \| 60480 \| 62640 \| 64800 \| 66000 \| 66960 \| 69120) { 58320:58320, 60480:60480, 62640:62640, 64800:64800, 66000:66000, 66960:66960, 69120:69120 } }
`password`	string
`tx-sector`	num
`put-stations-in-bridge`	interface_enum { none:0 }
`isolate-stations`	bool
`mdmg-fix`	bool

Read-only Argument	Type	Description
`default-name`	string
`default-scan-list`	multi_arg { array-id, enum (58320 \| 60480 \| 62640 \| 64800 \| 66000 \| 66960 \| 69120) { 58320:58320, 60480:60480, 62640:62640, 64800:64800, 66000:66000, 66960:66960, 69120:69120 } }
`beamforming-event`	num
`tx-io-msdu`	num
`tx-sw-msdu`	num
`tx-fw-msdu`	num
`tx-ppdu`	num
`tx-ppdu-from-q`	num
`tx-mpdu-new`	num
`tx-mpdu-total`	num
`tx-mpdu-retry`	num
`rx-ppdu`	num
`rx-mpdu-crc-err`	num
`rx-mpdu-crc-ok`	num

interface/w60g/reset-configuration

Type: Command

interface/w60g/monitor

Type: Command

Read-only Argument	Type	Description
`connected`	bool
`frequency`	num
`remote-address`	multi_arg { array-id, macAddr }
`tx-mcs`	multi_arg { array-id, num }
`tx-phy-rate`	multi_arg { array-id, num }
`signal`	multi_arg { array-id, num }
`rssi`	multi_arg { array-id, num }
`tx-sector`	multi_arg { array-id, num }
`tx-sector-info`	multi_arg { array-id, string }
`distance`	multi_arg { array-id, num }
`baseband-temperature`	num
`rf-temperature`	multi_arg { array-id, num }
`tx-packet-error-rate`	num

interface/w60g/align

Type: Command

Read-only Argument	Type	Description
`connected`	bool
`frequency`	num
`remote-address`	multi_arg { array-id, macAddr }
`tx-mcs`	multi_arg { array-id, num }
`tx-phy-rate`	multi_arg { array-id, num }
`signal`	multi_arg { array-id, num }
`rssi`	multi_arg { array-id, num }
`10s-average-rssi`	multi_arg { array-id, num }
`tx-sector`	multi_arg { array-id, num }
`tx-sector-info`	multi_arg { array-id, string }
`distance`	multi_arg { array-id, num }
`baseband-temperature`	num
`rf-temperature`	multi_arg { array-id, num }
`tx-packet-error-rate`	num

interface/w60g/scan

Type: Command

Flag	Name	Description
`R`	routeros	routeros

Read-only Argument	Type	Description
`address`	macAddr
`ssid`	string
`frequency`	string
`signal`	num
`rssi`	num

interface/w60g/station

Type: Directory

Flag	Name	Description
`X`	disabled	disabled
`R`	running	running

Argument	Type	Description
`name`	string
`parent`	interface_enum
`remote-address`	macAddr
`mtu`	num
`mac-address`	macAddr
`arp`	enum (disabled \| enabled \| proxy-arp \| reply-only \| local-proxy-arp)
`arp-timeout`	alt { enum (auto) { auto:0 } , time }
`put-in-bridge`	interface_enum { none:0, parent:0xffffffff }

Read-only Argument	Type	Description
`default-name`	string
`beamforming-event`	num

interface/w60g/station/monitor

Type: Command

Read-only Argument	Type	Description
`connected`	bool
`remote`	macAddr
`tx-mode`	enum (dmg \| edmg-cb1 \| edmg-cb2 \| edmg-cb1-long-ldpc \| edmg-cb2-long-ldpc)
`tx-mcs`	num
`tx-phy-rate`	num
`signal`	num
`rssi`	num
`tx-sector`	num
`tx-sector-info`	string
`distance`	num

interface/w60g